Follow

Powering Down Ignite

In rare cases, some users may want to shut down all the Ignite hardware; for example, to move it to another rack in the datacenter. Here is the procedure for doing so:

  1. Shut down all the instances
  2. From the Hardware page, power off the compute nodes and storage blocks by clicking on "..." beside each one and selecting "Power off"
  3. Once the compute and storage are powered off, click "..." beside the SDN router and select "Restart". When it finishes shutting down and before it boots again, unplug the power from the SDN router

Note: When powering on the hardware, first power on the SDN router, then power on compute and storage

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments